Ergometry; Defining The Automatic Load Programs - Ergosana Sana Bike 350 F Gebrauchsanweisung

Sana Bike 350 F and 450 F
7

Ergometry

This section describes ergometry with the internal ergometer software.
7.1

Defining the Automatic Load Programs

The following text field appears in the ergometer after it is switched on:
The menu item "Start ergometry" is highlighted with a black bar. This means the item is activated. It
is possible to select an exercise program directly from here and begin ergometry.
Beforehand, however, the five varying exercise programs must be defined according to the examiner's
needs and wishes. On delivery of the unit, each program is set with normal values which cannot harm
the patient in case they are accidentally activated.
Activate "Define program" via the arrow keys .
Confirm with the right "ok" button.
Article no.: 2.520068 Rev.: b Page 14 of 24