Unit Components; Display; Rotational Speed Display On Control Console; Panel Interfaces For 450 - Ergosana Sana Bike 350 F Gebrauchsanweisung

Sana Bike 350 F and 450 F
4

Unit Components

4.1

Display

The control panel is mounted on the upper side of the control panel carrier with two plug-in tabs. Dur-
ing normal operation, the display should be facing the examiner. It is possible to turn the console by
180 degrees for special applications such as patient training, etc., so that the patient can reach the
control elements and see the display.
All of the control electronics for ergometer operation and blood pressure measurement are located in
the control panel.
A backlit LCD featuring the complete range of information is located on the front side under a foil key-
board with a see-through window. The control elements for the adjustment and operation of the er-
gometer are located on the foil keyboard.
The connections for the blood pressure cuff are located on the underside of the 450 F. In couch er-
gometers, they contain an extension line. The cuff socket is located on the couch's upper edge.
An LCD on which the patient can see the number of pedal rotations per minute is located on the pa-
nel's upper side.
4.2

Rotational speed display on control console

n = crank rotations per min
-1
U min
4.2.1

Panel Interfaces for 450

The extension line for the blood pressure cuff is connected at the bottom of the control panel.
1. Cuff connection
2. Microphone connection
Article no.: 2.520068 Rev.: b
1 2
Page 9 of 24