Changing The Unit (Kg ↔ Lb); Additional Functions (Interactive Mode); Setting/Changing The Switch-Off Time (Power Off) - HBM SLS Kurzanleitung

Changing the unit (kg ↔ Lb)
6 Changing the unit (kg ↔ Lb)
Important
Only possible for scales that are not legal for trade/not verified.
"
Switch the scale on and wait for X10 seconds (see section 4.1).
5 sec.
Proceed in the same way to change from lb to kg. Whichever unit is last set is
retained even when the scale is switched off.
7

Additional functions (interactive mode)

7.1

Setting/changing the switch-off time (Power Off)

1‐5 x
12
HBM Short Reference Guide Lifter Scale A1221-5.2 Issue July 31, 2014
Unit kg
"
Keep it pressed for ~ 5 seconds
Unit lb
"
Switch the scale on and wait for X10 seconds
(see section 4.1).
Interactive mode (Standard_Function)
Press the G/N key once again to activate the automatic
switch-off time (Power Off) setting
"
Make the selection by repeatedly pressing the ON/
OFF key (the number flashes):
"
Simultaneously press the ON/
OFF and G/N keys to activate
interactive mode.
SLS