Battery Capacity - Yamaha PW45 Bedienungsanleitung

INSTRUMENT AND CONTROL FUNCTIONS
63
7 Remaining assist distance
This displays an estimate of the distance (in kilometers or
miles) that can be ridden with assist on the residual bat-
tery capacity of the battery installed. If you switch the as-
sist mode when the remaining assist distance is displayed,
the estimate of the distance that can be ridden with assist
changes.
The remaining assist distance estimate cannot be reset.
TIP
• The remaining assist distance changes depending on
the riding situation (hills, headwind, etc.) and as the
battery runs down.
• If in "Off mode", "- - - -" is displayed.

7 Battery capacity (%)

This displays the power remaining in the battery.
The residual battery capacity display cannot be reset.
7 Cadence
This displays your pedaling speed in revolutions per
minute.
The pedaling cadence display cannot be reset.
TIP
If you pedal in backward, "0.0" is displayed.
2 Running assist
When you are on or off the bicycle and start moving it, you
can use running assist without pedaling the bicycle.
When you press the running assist switch once, the run-
ning assist indicator will come on for five seconds.
Press and hold the running assist switch again while the
indicator is still lit.
Running assist will stop in the following situations:
• When you release the running assist switch.
• If you press another switch at the same time.
• When you start to pedal.
• If your bicycle speed exceeds the preset speed.
• If you select Off mode.
• If the wheels are not turning (when braking or coming
into contact with an obstacle, etc.).