Auxiliary Input Socket - Makita DMR114 Bedienungsanleitung

connection.
You can also press the Source button to select any mode
other than Bluetooth mode to disable the connection.
Deleting Bluetooth paired device memory
To clear the memory of all paired devices, press and hold
the Bluetooth pairing button more than 5 seconds until
"CLEARING" shows on the display.

AUXILIARY INPUT SOCKET

A 3.5mm Auxiliary input socket is provided at the front
of your radio to permit an audio signal to be fed into the
unit from an external audio device such as a MP3 or CD
player.
1. Connect an external audio source (for example, MP3
or CD player) to the AUX IN socket.
2. Press the Power button to switch on your radio.
3. Repeatedly press and release the Source button until
"AUX IN" is displayed.
4. To have the better sound quality, we recommend
setting the volume to more than two-thirds level on your
audio device and then adjust the volume on the radio
as required.
Note:
Audio cord is not included as standard accessories.
MAINTENANCE
CAUTION:
● Never use gasoline, benzine, thinner, alcohol or the
like. Discoloration, deformation or cracks may result.
● Do not wash the radio with water.
SPECIFICATIONS
Power requirements
AC power adaptor
Battery
Frequency coverage
®
Bluetooth
(The Bluetooth
trademarks owned by Bluetooth SIG, Inc.)
Bluetooth version
Bluetooth Profiles
Transmission Power
Transmisson Range
Supported codec
Compatible Bluetooth
profile
Maximum radio-
frequency power
Operating Frequency
Circuit feature
Loudspeaker
Output power
Input terminal
Antenna system
Dimensions(L x W x H) 268 x 164 x 295 mm
Weight
13 ENGLISH
DC 12V 2.5A, center pin
positive
UM-3 (AA size) x2 for back up
Slide battery: 10.8V - 18V
FM 87.50 - 108 MHz
(0.05MHz/step)
AM(MW)522-1,710 kHz
(9 kHz/step)
®
word mark and logos are registered
5.0 Certified
A2DP / SCMS-T / AVRCP
Power Class2
Optimum:
Max.10 meters (33 feet)
Possible:
Max.30 meters (100 feet)
(varies according to usage
conditions)
SBC
A2DP / AVRCP
BT EDR: 3.91dBm
2402MHz~2480MHz
2.5 inches 8 ohm x2
4 inches 6 ohm x1
10.8V-12V max: 2W X2 +10W
14.4V: 3W X2 +15W
18V: 5W X2 + 25W
3.5 mm dia. (AUX IN)
FM: Built-in antenna
AM: bar antenna
4.9KG (without battery)