Accessories - RIB K800 FAST Handbuch

ACCEssOrIEs -

r
ADIO TrANsMITTEr sUN
SUN 2CH cod. ACG6052
SUN CLONE 2CH cod. ACG6056
C
ODE LEArNIG sYsTEM rADIOrECEIVErs
RX433/A super eterodyne and coupling
RX433/A super eterodyne and terminal board
RX433/A 2CH super eterodyne, 2 channel and coupling code ACG5051
RX433/A 2CH super eterodyne, 2 channel and terminal board
s
PArK
In order to make the systems mentioned above give the best
performances, you need to install an antenna tuned on the frequency
of the radio receiver installed.
N.B. Pay attention to not let the central wire of the cable to came
Into contact with the external copper sheath, since this would
prevent the antenna from working.
Install the antenna vertically and in such a way the remote control can
reach it.
sPArK BLINKEr WITH IN-BUILT INTErMITTENT CArD
LATErAL sUPPOrT
sPArK ANTENNA 433
P
rOBE
The probe detects the motor temperature to operate the heating system
under low temperature conditions, up to -30°C (connect to connector
J6).
for the connections and the technical data of the optional equipments follow the
relevant handbooks.
SUN 4CH cod. ACG6054
SUN CLONE 4CH cod. ACG6058
code ACG5055
code ACG5056
code ACG5052
code ACG7059
code ACG7042
code ACG5452
code ACG4665
f
IT sYNCrO
fIT sYNCrO PHOTOCELLs for the wall-installation
The range you can set is 10-20 m, 30÷60ft.
You can fit many couples close together thanks to the synchronising
circuit.
Add the sYNCrO TrANsMITTEr
for more than 2 photocells couples (up to 4).
COUPLE Of BUILT-IN BOXEs fOr THE fIT sYNCrO
P
AIr Of COLUMNs fOr fIT sYNCrO
H = 0,5 m
B
LOCK
BLOCK KEY sELECTOr fOr WALL-INsTALLATION
BLOCK KEY sELECTOr TO BUILA-IN
N
YLON rACK MODULE 4
with zinc plated angle Iron, in 2 m bars.
Ideal for gates up to 1,000 kg / 2,200 lbs weight.
P
LATE TO BE CEMENTED
33
33
G
B
code ACG8026
code ACG8028
code ACG8051
code ACG8057
code ACG1053
code ACG1048
code ACS9050
code ACG8107