Operation And Use - Niko 450-00064 Gebrauchsanleitung

450-00064
2.4. Function
You can activate the automatic call receiver by pressing . The corresponding LED lights.
The appliance will accept the call after having received the number of preprogrammed ring
tones. The green LED blinks after having received the first ring tone. You can switch
the appliance that is connected to the output on or off by pressing push button S1. The
corresponding green LED S1 displays the switching status (LED lights = on).

3. OPERATION AND USE

After having called into the telephone interface, selected the language (at the first ring
tone) and inserted the code correctly, you can retrieve the status of the connected interface
via a DTMF telephone (1#) and also switch the appliance on or off (10, 11, 16) or modify
the individual settings, such as e.g. emergency numbers, own number, mode 'answering
machine', ring tones, code number, number of call attempts.
3.1. Status request (main menu):
Call the telephone interface and enter the code. (fabric settings: 0000).
"Enter your code number."
output status
10 switching device off
11 switching device on
16 impulse mode (1s)
1# status request
EN 59