Safety Guidelines - Opex Omation 210 Envelopener Serie Bedienerhandbuch

2.2. Safety Guidelines

This section provides safety guidelines to be observed when working with this
equipment.
Follow these safety guidelines whenever operating or maintaining the
equipment described in this manual.
Normal operations
with the normal working of the machine. Operator training is required, and
training is provided in
Keep loose objects away from any exposed, moving parts of the machine
moving parts of the Omation Series 210™ Envelopener®, such as the
conveyor, can become jammed and/or damaged by foreign objects. Keep
hands, hair, loose clothing and jewelry away from the moving parts.
Machine design
without consulting OPEX or your authorized representative.
Machine Maintenance
adjustments, whether mechanical or electrical, shall be carried out by persons
authorized to do so in accordance with a safe system of work.
Do not attempt to clean the machine while it is running
material) should never be used to clean moving parts such as belts or rollers.
The use of such material on moving mechanisms can result in damage to the
machine or severe personal injury. If a belt, roller, gate or similar part needs to
be cleaned, hand-crank the part during cleaning or clean it while stationary.
Do not use flammable, high pressure, "canned air" to clean dust and debris
from the machine.
Machine access
Electrical outlet
shall be easily accessible.
Keep away from children
where children are likely to be present.
Safety
Omation Series 210™ Envelopener® Operator Manual
- Only authorized personnel shall start, operate, or interfere
"Operation" on page
- Do not modify the design or configuration of the equipment
- Machine maintenance, particular operations, and all
- Keep all areas around the machine clear of obstacles.
- The socket-outlet shall be installed near the equipment and
- This equipment is not suitable for use in locations
OPEX Corporation
WARNING
37.
- The
- A cloth (or similar
19