Opex Omation 210 Envelopener Serie Bedienerhandbuch Seite 140

G.1. List of Terms
The following list of terms, used throughout the OMATION
®
Envelopener documentation, is sorted alphabetically.
A rotating wheel with the axle not in the center transforming rotary
Cam -
motion into linear motion.
- Collects cuttings discharged from the cutter.
Chip bin
Chip bin indicator light -
Circuit breaker
Counter reset button
Cutter depth knob -
Denatured Alcohol -
surfaces of the machine that leaves no residue.
Envelope Feed Hopper -
into the retard assembly
- A machine that opens envelopes.
Envelopener
Feed Thumper
- This belt grabs the bottom envelope and pulls it into the retard
Feed belt
assembly.
- A safety device that shuts the system down when tripped.
Interlock
- A problem with the system, typically (but not always) caused by a
Jam
blockage.
LCD count window -
time it was reset.
- A cutter that chips away the edges of the envelope small bit at
Milling cutter
a time like a circular saw.
Rollers that keep the envelopes firmly pressed against the belt as
Nip arms -
they move past the cutter.
- The person running the machine.
Operator
- Collects mail as it leaves the Series 210.
Output tray
70
Omation Series 210™ Envelopener® Operator Manual
Indicates if the chip bin is full.
- A button that acts as a fuse but can be reset by pressing it.
- This button resets the counter to zero.
The knob used to set the depth of cut.
A type of alcohol that can be used for cleaning the outer
The area where the envelopes are stacked to be fed
- A rotating cam that helps to jog the mail for improved feeding.
Shows the total count of the mail processed since the last
OPEX Corporation
®
Series 210