Switching Off; Temperature Regulation; Frostmatic Function; High Temperature Alarm - AEG S92500CNM0 Benutzerinformation

www.aeg.com
6
mode. Refer to "WHAT TO DO IF..."
paragraph.
5. The temperature indicators show the
set default temperature.
To select a different set temperature re-
fer to "Temperature regulation".

2.3 Switching off

To switch off the appliance do these
steps:
1. Press the appliance ON/OFF button
for 5 seconds.
2. The display switches off.
3. To disconnect the appliance from
the power disconnect the mains
plug from the power socket.
2.4 Switching off the wine
cellar
To switch off the wine cellar:
1. Press the Mode button until the cor-
responding icon appears.
The wine cellar Off indicator and the
wine cellar compartment indicator
flash.
The wine cellar temperature indica-
tor shows dashes.
2. Press the OK button to confirm.
3. The wine cellar Off indicator is
shown.
2.5 Switching on the wine
cellar
To switch on the wine cellar :
1. Press the Mode button until the cor-
responding icon appears.
The wine cellar Off indicator flashes.
2. Press the OK button to confirm.
3. The wine cellar Off indicator goes
off.
To select a different set temperature re-
fer to "Temperature regulation".

2.6 Temperature regulation

The set temperature of the wine cellar
and of the freezer may be adjusted by
pressing the temperature regulators.
Set default temperature:
• +10°C for the wine cellar
• -18°C for the freezer
The temperature indicators show the set
temperature.
The set temperature will be reached
within 24 hours.
After a power failure the set tem-
perature remains stored.

2.7 FROSTMATIC function

To switch on the function:
1. Press the Mode button until the cor-
responding icon appears.
The FROSTMATIC indicator flashes.
2. Press the OK button to confirm.
The FROSTMATIC indicator is
shown.
This function stops automatically after 52
hours.
To switch off the function before its au-
tomatic end:
1. Press the Mode button until the
FROSTMATIC indicator flashes.
2. Press the OK button to confirm.
3. The FROSTMATIC indicator goes
off.
The function switches off by se-
lecting a different freezer set
temperature.

2.8 High temperature alarm

An increase in the temperature in the
freezer compartment (for example due
to an earlier power failure) is indicated
by:
• flashing the alarm and freezer temper-
ature indicators
• sounding of buzzer.
To reset the alarm:
1. Press any button.
2. The buzzer switches off.
3. The freezer temperature indicator
shows the highest temperature
reached for a few seconds. Then
show again the set temperature.
4. The alarm indicator continue to flash
until the normal conditions are re-
stored.
When the alarm has returned the alarm
indicator goes off.