Panasonic AK-HC1800G Bedienungsanleitung Seite 54

Setting of menu items
 SETTING menu
[6] INTELLIGENT1
INTELLIGENT MODE
[AGC, ATW, AGC+ATW]
The intelligent control setting is selected
using this menu item.
AGC: When the gain cannot be adjusted
within the IRIS RANGE setting,
gain control (including PIX MIX,
V MIX, and FRAME MIX) and
automatic exposure control
performed by adjusting the ND filter
setting are executed.
ATW: When the subject is identified as
being white, the white balance is
adjusted automatically.
AGC+ATW:
The above AGC and ATW
adjustments are performed at the
same time.
ND FILTER SELECT
[CLEAR, 1/4, 1/16, 1/64, AUTO]
The ND filter setting during AGC operations
is selected using this menu item.
AUTO: Depending on the light quantity,
the ND filter is adjusted to the
appropriate position.
CLEAR, 1/4, 1/16, 1/64:
The specified ND filter setting is
fixed.
During AGC operations, control cannot be
exercised from the camera controller.
AGC SPEED [1 to 5]
The AGC convergence speed can be set to
any of 5 levels here.
The speed becomes faster as the figure
increases.
- 5 (E) -