HEIDENHAIN IK 220 Benutzerhandbuch Seite 94

Driver Software for WINDOWS
Function
Read amplitude values
block from RAM buffer
LED control of axes
LED control of card
Read external inputs
Evaluation of the
reference-mark signal
Input frequency for
sinusoidal incremental
signals
Function
Read IK 220 register
(16 bits)
Read IK 220 register
(32 bits)
Write IK 220 register
(16 bits)
Read value from RAM of
the IK 220
Write value into RAM of
the IK 220
Load firmware in the
IK 220
Set EnDat clock line
Set EnDat data line
Read EnDat data line
94
Short reference
BOOL IK220BurstSig
BOOL IK220Led
BOOL IK220SysLed
BOOL IK220GetPort
IK220RefEval
IK220SetBw
The following functions are used by the driver software.
They should not be used in application programs.
Short reference
BOOL IK220InputW
BOOL IK220InputL
BOOL IK220Output
BOOL IK220RamRead
BOOL IK220RamWrite (USHORT Axis, USHORT Adr,
BOOL IK220DownLoad (USHORT Axis,
BOOL IK220SetEnClock (USHORT Axis, BOOL State,
BOOL IK220SetEnData (USHORT Axis, BOOL State,
BOOL IK220ReadEnData(USHORT Axis, BOOL State)
(USHORT Axis,
USHORT maxCount,
USHORT* pPeriod,
SHORT* pAmp0,
SHORT* pAmp90,
USHORT* pCount,
USHORT* pStatus)
(USHORT Axis,
USHORT Mode)
(USHORT Card,
USHORT Mode)
(USHORT Axis,
USHORT* pPortInfo,
USHORT* pRising,
USHORT* pFalling)
(USHORT Axis,
USHORT Mode)
(USHORT Axis,
USHORT Mode)
(USHORT Axis, USHORT Adr,
USHORT* pData)
(USHORT Axis, USHORT Adr,
ULONG* pData)
(USHORT Axis, USHORT Adr,
USHORT Data)
(USHORT Axis, USHORT Adr,
USHORT* pData)
USHORT Data)
USHORT* pPgmData,
ULONG PgmSize)
USHORT* pStatus)
USHORT* pStatus)