Encoder Outputs - HEIDENHAIN IK 220 Benutzerhandbuch

Hardware

Encoder outputs

Encoder outputs
11 µA
PP
76
The IK 220 also feeds the encoder signals from inputs X1 and
X2 as sinusoidal current signals (11 µA
MICROMATCH connectors (female) on the PCB. An additional
cable assembly with PC slot cover (Id. Nr. 340 252-01) can be
used to lead these connections out to 9-pin D-sub connectors.
Adapter cables (Id. Nr. 309 781-xx) for connecting HEIDENHAIN
position displays and interpolation units are available (see
"Items supplied" and "Accessories").
The maximum cable length depends on the input circuit of the
subsequent electronics.
Plug-in PCB for encoder outputs
Connections X6, X7
MICROMATCH with female contact 10-pin
1)
Connection no.
1a
1b
2a
2b
3a
3b
4a
4b
5a
5b
Pin 1a is located on the side with the polarizing key.
1)
) to two 10-pin
PP
Signal
I
-
1
I +
1
0 V (U )
N
Not assigned
I -
2
I +
2
Not assigned
I +
0
I
-
0
Not assigned