Hardware
Hardware
Specification of the PCI bus
72
The IK 220 can be installed in all PCs with PCI bus.
Specification
Size
Connector
PCI component
Current consumption +12 V:
Power consumption
1)
Without current consumption of connected encoders
Identifier in component PCI9052:
Vendor ID = 0x10B5
Device ID = 0x9050
Subvendor ID = 0x10B5
Subdevice ID = 0x1172
The IK 220 can be unmistakably identified with these four
identifiers. The "Sub Device ID" is assigned exclusively to the
IK 220.
PCI local bus Spec. Rev. 2.1
Approx. 100 * 190 mm
PCI 5 V / 32-bit (2*60) connecting
element
PCI 9052 from PLX, target interface
(slave)
1)
22 mA
-12 V:
22 mA
+5 V:
620 mA
< 4 watts, without encoders