Grundig GKN 3000 Carbon Bedienungsanleitung Seite 15

1. Temperature Adjustment /
Temperature Increase
When pressed, increases the
temperature of the selected
compartment.
2. Temperature Adjustment-
Slider/Temperature value
indicator
Shows the temperature value of
the selected compartment. Plus,
you can slide your finger up or
down to increase or decrease the
temperature.
3. Temperature Unit Selection (°C)
Celsius
indicator
When the button is pressed, the
temperature unit is selected as
Celsius.
It is the Celsius indicator. When
the Celsius indication is activated,
temperature set values are shown in
Celsius and the relevant icon turns on
by 100%.
Fahrenheit icon turns on by 50%.
4. Temperature Unit Selection (°F)
Fahrenheit
indicator
When the button is pressed, the
temperature unit is selected as
Celsius.
It is the Fahrenheit indicator. When
the Fahrenheit indication is activated,
temperature set values are shown
in Fahrenheit and the relevant icon
turns on completely.
Celsius icon turns on by 50%.
5. Temperature Adjustment /
Temperature Decrease
When pressed, decreases the
temperature of the selected
compartment.
6. Quick fridge function indicator
When the quick fridge function is
activated, the indicator turns on by
100%. When the function is
the product returns to its normal
settings and the indicator turns on
by 50%.
Quick fridge function button
It is used to activate or deactivate the
quick fridge function.
C
Use quick fridge function
when you want to quickly
cool the food placed in
the fridge compartment.
If you want to cool large
amounts of fresh food,
activate this function
before putting the food
into the product.
C
If you do not cancel it,
quick fridge will cancel
itself automatically
after 8 hours at the
most or when the fridge
compartment reaches to
the required temperature.
C
If you press the quick
fridge button repeatedly
with short intervals,
the electronic circuit
protection will be
activated and the
compressor will not start
up immediately.
C
This function is not
recalled when power
restores after a power
failure.
7. *Wireless
When the button is pressed, the
product is introduced to the home
network. When the function is
activated, the indicator turns on
by 100%, when it is cancelled, the
indicator turns on by 50%.
cancelled,
15