Technical Data; Intended Use; Safety Notices - Crivit IAN 292791 Gebrauchsanweisung

Congratulations!
With your purchase you have decided on a
high-quality product. Get to know the product
before you start to use it. Carefully read the
following instructions for use. Use the
product only as described and only for the given
areas of application. Keep these instructions
safe. When passing the product on to a third
party, always make sure that the documentation
is included.
Contents
1 x Knee pad left
1 x Knee pad right
1 x Elbow pad left
1 x Elbow pad right
1 x Wrist pad left
1 x Wrist pad right
1 x Storage bag
1 x Instructions for use

Technical Data

Performance class 1: Skate pads for normal
roller sports in accordance with DIN EN 14120
Size XXS: Weight under 25 kg
Size XS: Weight 25-50 kg
The European standard EN14120
defines two skate pad performance
classes: Class 1: Skate pads for normal roller
sports and Class 2: Skate pads for acrobatic
roller sports.
The declarations of conformity are available at
http://www.conformity.delta-sport.com/
Date of manufacture (month/year):
12/2017

Intended Use

This product consists of skate pads for normal
roller sports. This product was developed for
private use.

Safety Notices

Risk of injury!
• Attention! Any packaging material and fas-
tening material is not part of the product and
for safety reasons should always be removed
before giving the product to children.
• Only allow children to play with the product
under adult supervision.
• Always wear suitable protective devices
(helmet, gloves, wrist pads, elbow pads
and knee pads).
• Always exercise due care while skating, in
line with your skating abilities. Even the best
equipment cannot fully protect you.
• Avoid areas with high traffic density.
• Always be attentive and careful.
• The effectiveness of the skate pads can be
reduced in extremely warm or cold tempera-
tures.
• To ensure the best possible protection choose
the correct skate pad size. Try them on to
check if they fit your knees, arms and hands.
• The skate pads should never be too loose.
They should be tied tightly and be difficult to
shift back or forth from their position.
• Inspect your skate pads carefully for damage
before each use, particularly after falls.
• If the skate pads are damaged, for example,
by tears, cracks or loose parts, they are no
longer usable. They must no longer be used.
• Keep the Velcro strips free of coarse impurities.
It is only in this way that their adhesive power
can be guaranteed.
• Do not modify the skate pads, as otherwise,
their protective function can no longer be
guaranteed.
• The life of the product varies by use. However,
the product must be replaced no later than five
years from the date of manufacture (12/2017).
GB 3