Herunterladen Inhalt Inhalt Diese Seite drucken

Operation; Preparation; Switching On; Operate - Medicap Precise 6000 Gerätebeschreibung Und Gebrauchsanweisung

Vorschau ausblenden Andere Handbücher für Precise 6000:
Inhaltsverzeichnis
Verfügbare Sprachen

Verfügbare Sprachen

2. Operation

2.1. Preparation

Unfold the carrier handle for convenient transportation. The
should be set
Précise 6000
up in a well aired, dry, cool and dust-free room. The
should not be placed
Précise 6000
near radiators, fan heaters etc.. The air supply must not be obstructed because cooling air
is needed for the compressor. Connect the
to the mains cable supplied.
Précise 6000
Insert plug into mains.
ATTENTION!
If you use Item No. 006.357
FireSafe™
Cannula or Item No. 006.359
FireSafe™
Nozzle
please note Installation Instructions -
FIRESAFE™.

2.2. Switching On

If the apparatus was stored at room temperatures below 10°C the device needs to adapt
to the room temperature, otherwise malfunctions might turn up. Switch the ON/OFF
button for automatic check of all functions. Any malfunctions will be indicated in the
display window together with the service telephone number.

2.3. Operate

After switching on the device the flow value administered by your attending physician can
be set with the help of the control button of the flow meter (oxygen output in liter/min.).
The middle of the bowl of the flowmeter indicates the set value. Working hours,
operating state and at Option I the treatment hours (ionisation is switched on) are
indicated in the display. When operated with humidifyer switch off the hose connection,
set the humidifyer bottle into the rack and connect the bottle. Then connect the hose to
the humidifyer.

2.4. Discontinuing Operation

Press the ON/OFF button. The display fades out. If the device is not used again during the
same day disconnect the humidifyer bottle. Do not keep the water (risk of germ
development). If not in use over longer periods of time pull the plug from mains.

2.5. Oxygen Concentration Monitoring (OCSI) Option

A permanent monitoring of the oxygen concentration in the product gas works by using a
wear resisting oxygen sensor on an ultrasound basis. Set values falling below limits are
Rev. D 2018-11
24

Quicklinks ausblenden:

Inhaltsverzeichnis
loading

Inhaltsverzeichnis