Circor SR-3300 Einbau- Und Betriebsanleitung Seite 50

Einbau- und Betriebsanleitung
Installation and Operating instructions
<ENTER>
6.3.5.6
Split Range Mode (SPLIT)
The valve can be operated by split range control – 4~12mA or 12~20mA.
<ENTER>
6 seconds
<UP>/<DOWN>
<ENTER>
6.3.5.7
Custom Zero Setting Mode (CST ZERO)
Custom Zero Setting Mode allows the user to set any specific point as zero position. For example, the zero point can be set
at input signal of 7mA.
<ENTER>
<UP>/<DOWN>
<ENTER>
6.3.5.8
Custom End Setting Mode (CST ENd)
Custom End Setting Mode allows the user to set any specific point as end position. For example, the end point can be set at
input signal of 11mA. The difference between zero and end point must be greater or equal to 4mA.
⇨
⇨
⇨
⇨
Page 50
SR3300-8010
SR-3300
⇨
<DOWN>
5 times
⇨
<ESC>
3 times
⇨
<DOWN>
6 times
⇨
<ESC>
3 times
⇨
<ENTER>
⇨
<ENTER>
07/2018