Disposal Of The Packaging; Operation - Silvercrest SEMK 105 A1 Bedienungsanleitung

Disposal of the packaging

The packaging protects the appliance from damage during transport . The pack-
aging materials have been selected for their environmental friendliness and ease
of disposal, and are therefore recyclable .
Returning the packaging to the material cycle conserves raw materials and
reduces the amount of waste that is generated . Dispose of packaging materials
that are no longer needed in accordance with applicable local regulations .
Note the labelling on the packaging and separate the packaging material
components for disposal if necessary . The packaging material is labelled with
abbreviations (b) and numbers (a) with the following meanings:
1–7: Plastics
20–22: Paper and cardboard
80–98: Composites
NOTE
► If possible, keep the original packaging during the warranty period so
that the appliance can be properly packed for returning in the event of a
warranty claim .

Operation

Before starting to use the appliance, ensure that . . .
– the appliance, power plug and mains cable
and . . .
– all packaging materials and protective films have been removed from
the appliance .
♦
Clean all parts of the appliance as described in the section entitled
"Cleaning and care" .
♦
Insert the plug into a suitable mains power socket . The control lamp
flashes green .
The appliance is now ready for use .
CAUTION – PROPERTY DAMAGE!
► If you have moved the appliance, wait around 2 hours before using it
again .
► Make sure that the ambient temperature is between 10 and 32°C .
■ 8 │ GB │ IE │ NI │ CY
are in perfect condition
SEMK 105 A1