Herunterladen Inhalt Inhalt Diese Seite drucken

Sharp UJ-GC20E Bedienungsanleitung Seite 9

Plasmacluster ion generator
Vorschau ausblenden Andere Handbücher für UJ-GC20E:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Cautions on wiring the car adapter
• Do not let the cord touch or get caught in the seat rails, shift lever or other
moving parts.
• Wire in such a way that the cord does not get in the way of the driver.
• Consider the movement of the seats (forward/backward, swiveling or reclining)
when wiring.
• Do not bend the cord extremely or compress it.
Cautions on installation
• Separate the main unit from electronic key of
vehicle by 30cm or more. Otherwise, it may
interfere with electronic wave of main unit and
the electronic key may not be recognized.
• Be sure to place in a stable location. (Do not put in a external cup holder or
other unstable place.)
• Do not obstruct the air inlet or outlet.
• Keep the unit away from the vehicle's in-glass antenna. Failure to do so could
cause interference on the radio.
• If there should be interference on a TV or radio located in the same car, or if
an atomic clock in the car should not display the time properly, move the unit
away from the TV, radio, atomic clock, etc.
• If the unit is installed directly in front of the car climate control's outlets, the unit
could get hot when the climate control is operating in the heating mode.
• The unit could get scratched by the vibrations of the vehicle, etc.
• It might be impossible to use for some types of cars.
Separate the main unit from electronic
key of vehicle by 30cm or more.
E-6

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis