Silvercrest HG04772A Bedienungs- Und Sicherheitshinweise Seite 18

The product is powered at all
times while it is connected to the
power supply .
Before connecting the product
to the power supply, check that
the voltage and current rating
corresponds with the power
supply details shown on the
product's rating label .
Regularly check the power plug
and the power cord for damages .
If the power cord is damaged,
it must be replaced by the
manufacturer, its service agent
or similarly qualified persons in
order to avoid a hazard .
Protect the power cord against
damages . Do not let it hang over
sharp edges, do not squeeze or
bend it .
Keep the power cord away from
hot surfaces and open flames .
Operation
The product must not be left
unattended while it is connected
to the supply mains .
18 GB/IE
Do not move the product while it
is in operation .
Do not place the product on hot
plates (gas, electric, coal cooking
range etc .) . Operate the product
on a level, stable, clean, heat-
resistant and dry surface .
Do not cover the product while it
is in use or shortly after use, when
it is still hot .
Make sure that the power cord
is not pinched by the plates or
touches the rim of the plates .
The use of extension cords is not
recommended . If the use of an
extension cord is necessary, it
must be designed for a current
flow of at least 10 A .
Lay cords in such a way that
they may not be tripped over or
otherwise damaged .
The product is not intended to
be operated by means of an
external timer or separate remote
control system .