English
54
Using the DVD-menu
Using fast forward or reverse
Enlarging a screen section
Changing the viewing angle
Adjusting the volume
Normally each DVD has its own menu. Here you can choose chapters,
make settings, etc. This menu is specific for the DVD and can thus not be
explained in detail.
Press the MENU-button (Fig. 2/11) to access the DVD-menu. Use the
Cursor Buttons (Fig. 2/9) to navigate in the Menu. Press the ENTER-
button (Fig. 2/22) to confirm.
If you are in a menu area for direct chapter selection, you can enter the
number of this chapter with the Numerical Buttons (Fig. 2/26) on the
remote control.
The DVD-Player has a fast forward and a fast reverse feature.
1. Press the /PG-TV (Fig. 2/15) or /FAV button (Fig. 2/16) to
start fast forward or fast reverse. The current replay direction and
the speed, e.g. „ x 2" is now displayed on screen.
2. Press the /PG-TV or /FAV, button several times in order to
change the speed. The speed can be accelerated by factor 2, 4, 8, 16
or 32.
3. Press the „II" button (Fig. 2/8) to restart the "normal" replay when
the desired section is reached.
You can change the screen section when viewing DVDs, VCDs or images.
Press the ZOOM-button (Fig. 2/12) to change the screen section. Press
the button several times to select the suitable zoom factor or to return
to the original zoom factor.
NOTE:
With the cursor buttons (Fig. 2/9) you can move through the zoomed
image.
Some DVDs offer the possibility to select the viewing angle.
Press the ANGLE-button (Fig. 2/28) to change the viewing angle.
NOTE:
If changing the Viewing Angle is not possible, the message „ "will be
displayed.
Repeat pressing the the button to choose a different viewing angle, or
to return to the original viewing angle.
Press the button (Fig. 2/9) to increase the volume.
Press the button (Fig. 2/9) to reduce the volume.
NOTE:
On the device you can use the VOL+ and VOL- buttons (Fig. 1/10, 16)
to set the volume.