Changing The Default Settings; Understanding The Menu Structure; Using The Menu - AEG dvd 4611 hc Bedienungsanleitung

Changing the default settings

Themen
Understanding
the menu structure

Using the menu

64
Rotating a photo
You can use the Cursor buttons to rotate a photo during replay:
Rotate clockwise for 90°: Cursor Button „ "
Rotate counter-clockwise for 90°: Cursor Button „ "
Changing the default settings
A large number of default settings can be comfortably changed via the screen
menu.
Press the SETUP-button (Fig. 3/4) on the remote control to start the menu for
changing the default settings.
NOTE:
Many of these default settings can be changed via both the remote control
and the menu. The difference is: If you change the default settings via the
remote control, these changes will only be valid until the DVD-Player is
switched off or the DVD is changed.
However, any changes made in the menu are permanent.
The Setup menu has two menu levels:
Main menu: The main level is represented by graphical symbols.
Sub-menu: The corresponding sub-menu options can be found under
each of the main menu options.
Navigation and selection
Use the Cursor Buttons (Fig. 3/9) ( / ) on the remote control to
browse through the main menu.
In contrast to this, you must use the Cursor Buttons ( / ) to move in
the sub-menu.
Select a menu option with the ENTER-button (Fig. 3/27).
Use the ENTER-button also to select an option (e.g. "PAL" in the illustration
on the left). The selected option (in the example „PAL") is now highlighted.
Slide control
In many menus you will fi nd slide controls to adjust e.g. the volume or the
brightness of the screen. The slide control is used as follows:
1. Select with the ENTER-button.
2. Move the control with the Cursor Buttons ( / ).
3. Confi rm the entry with the ENTER-button.