Selecting A Section To Be Repeated; Using The Dvd-Menu; Using Fast Forward Or Reverse; Enlarging A Screen Section - AEG dvd 4536 Bedienungsanleitung

English
50
Selecting a section
to be repeated

Using the DVD-menu

Using fast forward or reverse

Enlarging a screen section

Changing the viewing angle

05-DVD 4536 N AEG_GB.indd 50 05-DVD 4536 N AEG_GB.indd 50
You can defi ne a freely selected section to be automatically repeated.
To do this, proceed as follows:
1. Mark the beginning of the section to be repeated. During repetition
press the button A-B (Fig. 3/24) on the remote control once. The
message „REPEAT A" appears on the screen.
2. Mark the end of the section to be repeated by pressing the A-B-
button on the remote control once again. The message „REPEAT
A-B" appears on the screen. The previously marked section is now
repeated.
Press the A-B-button again to stop the repetition.
NOTE:
On CDs/MP3 CDs the section to be repeated must be within a track.
Normally each DVD has its own menu. Here you can choose chapters,
make settings, etc. This menu is specifi c for the DVD and can thus not be
explained in detail.
Press the MENU button (Fig. 3/8) to access the DVD-menu. Use the Cur-
sor Buttons (Fig. 3/30) to navigate in the Menu. Press the ENTER button
(Fig. 3/7) to confi rm.
If you are in a menu area for direct chapter selection, you can enter the
number of this chapter with the Numerical Buttons (Fig. 3/2) on the
remote control.
The DVD-Player has a fast forward and a fast reverse feature.
1. Press the (Fig. 3/25) or
or fast reverse. The current replay direction and the speed, e.g.
„FORWARD x 2 " is now displayed on screen.
2. Press the or button several times in order to change the speed.
The speed can be accelerated by factor 2, 4, 8 or 20.
3. Press the „ II" button (Fig. 3/27) to restart the "normal" replay when
the desired section is reached.
You can change the screen section when viewing DVDs, VCDs or images.
Press the ZOOM button (Fig. 3/6) to change the screen section. Press the
button several times to select the suitable zoom factor or to return to
the original zoom factor.
NOTE:
With the cursor buttons (Fig. 3/30) you can move through the zoomed
image.
Some DVDs off er the possibility to select the viewing angle.
Press the ANGLE button (Fig. 3/35) to change the viewing angle.
NOTE:
If changing the Viewing Angle is not possible, the message „INVALID
KEY" will be displayed.
button (Fig. 3/26) to start fast forward
30.07.2009 16:50:20 Uhr 30.07.2009 16:50:20 Uhr