Connection To Other Equipment - AEG CTV 4952 LCD/DVD/DVB-T Bedienungsanleitung

English
48
Connection to a television set
(AV OUT Fig. 1/5)
Connecting other Playback Devices

Connection to Other Equipment


NOTE:
The 4-pole audio/video cable is not supplied.
If the television set has audio/video inputs.
If the television set has a Scart connection.
Playback of a DVD on the Television Set
1. Turn on the DVD player by the ON/OFF switch.
2. Turn on the television set and follow the instructions supplied with
the television set.

NOTE:

Please ensure that the correct audio/video cable is used as the
wrong cable will produce a weak signal.

DVDs are copy-protected and cannot be copied. If a DVD is copied
onto a video cassette you will see a blurred picture with poor
sound quality. This is NOT the fault of the device!
In order to play back the picture from another playback device
(e.g. digital camera) on the LCD screen, connect the audio/video cable
to the AV IN socket (Fig. 1/4) and the other end to the playback device.
Press the AV OUT/IN button (Fig. 2/1) in order to turn the device to AV
IN operation.

NOTE:
If you would like to display the image of the internal DVD player again
on the LCD screen, press the AV OUT/AV IN button (Fig. 2/1) again.