Crevice Tool; Switching On / Off; Servicing And Cleaning - Silvercrest SHS 12.0 B2 Bedienungsanleitung

Crevice tool

:
Use this attachment to get into narrow, diffi-
cult-to-access places.
♦ Insert the crevice tool
nozzle .
Removing attachments:
♦ Simply pull the attachment off the front nozzle
or the extension hose
Switching On / Off
♦ Insert the 12 V plug
cigarette lighter socket of the vehicle.
♦ To switch the device on, press the ON / OFF
switch forwards into the I position.
♦ To switch the device off, press the ON / OFF
switch back into the 0 position.
♦ Pull the 12 V plug
after use.
NOTE
► If you going to vacuum for a long period, we
recommend that you carry out the cleaning
with the engine running.
■ 4 │ GB │ CY
snugly into the front
.
into the 12 V socket /
out of the 12 V socket

Servicing and cleaning

The device requires no maintenance.
CAUTION
♦ Before you clean the device itself, pull the
12 V plug out of the 12 V socket, other-
wise there Is a risk of electric shock
♦ Clean all the housing with a soft, dry cloth.
Never use liquids or cleaning agents, as they
may damage the device.
♦ For the best possible performance, you should
empty the dust container
use and when the suction power drops.
♦ Press the unlocking button
container out of the housing
♦ Take out the dust filter
clean the dust filter better if you detach it from
the end seal. To do this, hold the end seal firmly
and twist the filter off carefully anticlockwise
(bayonet fitting). Rinse out the dust filter
thoroughly in cold water and allow both parts
(filter and end seal) to dry completely. Attach
the filter back on to the end seal.
♦ Empty the dust container
♦ Carefully replace the dust filter
the dust container
cleaner without the dust filter
♦ Attach the dust container
on to the housing
engage.
CAUTION
► The front nozzle
structed at all times. Blockages can lead to
overheating and damage to the motor.
immediately after
and take the dust
.
. You will be able to
completely.
back into
. Never use the vacuum
in place.
carefully back
and ensure the two parts
must be free and unob-
SHS 12.0 B2