Troubleshooting; Disposal; Disposal Of The Appliance; Disposal Of Packaging - Silvercrest SPCM 1200 C1 Bedienungsanleitung

Troubleshooting

Problem
The appliance is
not working .
The appliance
switches off
during operation .
If the malfunction cannot be corrected using one of the suggestions above, or if
you have found some other kind of malfunction, please contact our Customer
Service department .

Disposal

Disposal of the appliance

Never dispose of the appliance in your normal domestic waste .
This product is subject to the provisions of European Directive
2012/19/EU .
Dispose of the appliance via an approved disposal company or your municipal
waste facility . Please comply with all applicable regulations . Please contact your
waste disposal facility if you are in any doubt .
Your local community or municipal authorities can provide information on how
to dispose of the worn­out product .

Disposal of packaging

Returning the packaging to the material cycle conserves raw materials and
reduces the amount of waste that is generated . Dispose of packaging materials
that are no longer needed in accordance with applicable local regulations .
Dispose of the packaging in an environmentally friendly manner .
Note the labelling on the packaging and separate the packaging material
components for disposal if necessary . The packaging material is labelled with
abbreviations (a) and numbers (b) with the following meanings:
1–7: Plastics,
20–22: Paper and cardboard,
80–98: Composites .
■ 52 │ GB │ MT
Possible cause
The appliance is not connected
to a mains power socket .
The appliance is damaged .
The overheat protection has
been activated .
Possible solution
Connect the appliance
to a mains power socket .
Contact the Customer
Service department .
Turn the appliance off
and allow it to cool for
15 – 20 minutes .
SPCM 1200 C1