Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Sib-T
U s e r m a n u a l
Fixing to a wall or ceiling
Before fixing to a wall, make sure there are no electric cables or pipes within the wall.
E
1. Use the Allen key supplied under the Sib-T base
to unscrew the bracket and separate it from the
speaker.
G
3. Place the bracket against the wall and mark the holes
to be drilled for the three fixing screws supplied.
Use a 6 mm Ø drill to drill the holes.
Use the three wall plugs supplied. Fix the bracket
with the three screws.
F
2. Sib-T wiring: see "wiring" chapter on page 6.
Route the speaker cable as indicated. Leave 10 cm for
wiring the Sib-T.
H
4. Unscrew the two clamps with the Allen key.
5
Werbung
