Eco; Auto Power Standby - Yamaha HTR-3067 Bedienungsanleitung

ECO

Configures the power supply settings.
• Default settings are underlined.
■

Auto Power Standby

Set the amount of time for the auto-standby function.
Settings
Off Does not set the unit to standby mode automatically.
Sets the unit to standby mode when you have not operated the unit
20 minutes
and the unit has not detected any input signal for the specified time.
2 hours, 4 hours, Sets the unit to standby mode when you have not operated the unit for
8 hours, 12 hours the specified time.
Default
U.K. and Europe models: 20 minutes
Other models: Off
• Just before the unit enters standby mode, "AutoPowerStdby" appears and then countdown starts in
the front display.
■
ECO Mode
Enables/disables the eco (power saving) mode.
When the eco mode is enabled, you can reduce the unit's power consumption by
keeping the maximum volume, maximum output power, or front display's brightness
low.
Settings
Off Disables the eco mode.
On Enables the eco mode.
• Be sure to press ENTER to restart the unit after selecting a setting. The new setting will take effect
after the unit is restarted.
CONFIGURATIONS ➤ Configuring various functions (Setup menu)
61
En