Changing The Initial Settings; Erasing A Single Clp-511 Track; Erasing All Recorded Data On The Clp-411 - Yamaha Clavinova CLP-411 Bedienungsanleitung

Using the Recorder
RECORDER
START/
REC
CLP-411 STOP
RECORDER
START/
REC
STOP
CLP-411
RECORDER
START/
CLP-411
REC
STOP
CLP-511
RECORDER
START/
1 2
STOP
Press twice.
RECORDER
CLP-411
START/
STOP
Press twice.
18
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Start Recording
Recording will begin automatically as soon as you play a note on the
keyboard or press the [START/STOP] button. The current measure
number will appear on the display while recording.
NOTE
Stop Recording
Press either the RECORDER [REC] or [START/STOP] button to
stop recording.
The [REC] button indicator on the CLP-411 will go out. The indica-
tor of the recorded track on the CLP-511 will glow green to indicate
that it now contains data.

Changing the Initial Settings

The initial voice (including dual mode), damper pedal, soft pedal,
tempo, reverb type, reverb depth, and effect settings made in step 1 of the
recording procedure are actually recorded by the CLP-411/511. These
initial settings can be changed after the recording is finished by pressing
the [REC] button to engage the record ready mode (and pressing the
appropriate track button on the CLP-511), making the required changes,
and then pressing the [REC] button again to exit from the record ready
mode and register the changes. If you do this, be careful not to press the
[START/STOP] button or a key on the keyboard, either of which will
start recording and erase all previous recorded data on the CLP-411, and
all data on the selected track on the CLP-511. If you start this procedure
on the CLP-411 but decide to cancel, simply press the [REC] button a
second time without making any changes to exit. On the CLP-511 it is
possible to cancel the operation even after changes have been made:
change tracks and then press the [REC] button to exit from the record
mode (this also cancels data for the entire song).
NOTE
REC

Erasing a Single CLP-511 Track

All data can be erased from either of the CLP-511 recorder's tracks
by engaging the record mode, selecting the track you want to erase, and
then pressing the [START/STOP] button twice without recording any
data.

Erasing All Recorded Data On the CLP-411

REC
All data can be erased from the CLP-411 recorder by engaging the
record mode and then pressing the [START/STOP] button twice
without recording any data.
................................................................................................
• The left pedal can be assigned to start and stop recording via the "Left
Pedal Mode" function described on page 25.
• If the metronome was on when you started recording, you'll be able to
keep time with the metronome while recording, but the metronome sound
will not be recorded.
• You can record up to a maximum of about 4,200 notes, depending on
pedal usage and other factors. The [REC] button or record track indica-
tors will begin to flash when recorder memory is almost full. If the
memory becomes full during recording, "FUL" will appear on the display
and recording will stop automatically.
................................................................................................
• The initial data of the "Dual mode functions (F3)" or "Split mode functions
(F4, CLP-511 only)" cannot be changed.
.............................................................
.....................................................
.....................