Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4. Design and function
Alternatively the coding can take place directly in the female connector (rack side) and the
associated male connector (switching amplifier side) after the following coding plan:
GB
The coding pin is inserted with a tool captive in the appropriate place in the female
connector and at the opposite side in the male connector is a drilling.
In mounted case
■
4.3 Scope of delivery
Cross-check scope of delivery with delivery note.
18
time delay on
time delay off
time delay
Failure
Signal
Fuse
Supply
WIKA operating instructions models LSO.06, LSO.25
75 high
Werbung
Kapitel
