Introduction - Seagate DDS Installationsanleitung

Seagate DAT Drive Installation Manual—English

Introduction

This manual contains information on how to install and
operate Seagate
manual covers DAT drives that support the DDS (digital data
storage), DDS-DC, DDS-2 and DDS-3 tape formats.
The following table identifies the Seagate DAT drive models
covered by this manual and the tape formats that they
support.
Format DDS
Capacity 2 Gbytes
4320NT
3.5-inch
internal CTD2004H-S
models
STD12000N
4320RT
5.25-inch
CTD2004R-S
internal
STD22000N
models
4350XT
External
CTD2004E-S
models
STD62000N
* Typical capacity, assuming 2:1 data compression. Native capacity is
one half these values.
Note: The dip-switch and jumper configurations in this
manual apply only to those drives whose model numbers
begin with the letters "STD." For older drives, see the
Seagate web site (www.seagate.com) or contact Seagate
technical support, as described at the back of this
manual.
®
digital audio tape (DAT) drives. This
DDS-DC DDS-2
4* Gbytes 8* Gbytes
4324NP 4326NP
CTD4004H-S CTD8000H-S
STD14000N STD18000N
4324RP 4326RP
CTD4004R-S CTD8000R-S
STD24000N STD28000N
4324XP 4326XP
CTD4004E-S CTD8000E-S
STD64000N STD68000N
A-5
DDS-3
24* Gbytes
STD124000N
STD224000N
STD624000N