Configuring For The Ibm Aix Environment - Seagate DDS Installationsanleitung

A-36 Seagate DAT Drive Installation Manual—English
7. SAM may detect that your HP-UX kernel lacks the drivers
necessary to make use of the Tape Drive. If so, within
the "Device Driver Check" window, read the message
and choose the appropriate action. If the chosen option is
Build a new kernel and shut down the system
immediately , SAM will create a new kernel, and
automatically reboot the system. Once the system comes
back up, the necessary drivers will be loaded, and the
system will be able to use the Tape Drive.
If you had to shut down the system in order to physically
connect the Tape Drive, re-enter SAM and repeat steps 3
to 6.
8. Choose the new Tape Drive
9. From the Actions menu, choose Create Device Files
9. Press OK and then exit from SAM.

Configuring for the IBM AIX Environment

AIX Version 3.2 and later
The Seagate Scorpion-24 Drive can be configured to work
with AIX Versions 3.2 and later by using the SMIT "Other
SCSI Tape Drive" option . NOTE: Record the SCSI ID of the
tape drive before installing it. To configure AIX using the
SMIT utility, use the following procedure:
1. Enter SMIT at the Tape Drive menu by typing "smit tape"
2. Select "Add a tape Drive"
3. Select the type of tape drive you will be adding. Use the
"Other SCSI Tape Drive" option.
4. Select the Parent SCSI Adapter from the available list
5. The Add a tape Drive "Entry Fields" now appear. Some of
the standard options need to be changed to maximize
drive performance and functionality:
a. Set the Connection Address with the Drives Target
and Lun ( always use Lun 0 ). In the list, the Target is