The Appliance Components; Setting Up The Appliance - Silvercrest KH 2299 Bedienungsanleitung

The appliance components

q Mounting plate/Baseplate
w Power cable
e Wire aerial
t–i M1–M4
o MEM/AMS
a MEM.SCAN
s TIMER
d Illuminated clamp strip
f AL2/VOL —
g AL1/VOL +
h USER/BAND
j LIGHT/DIMMER
k MODE/LOCK
l DOWN

1( UP

2) Battery compartment
2! ON/AOT/OFF

Setting up the appliance

First take all appliance components from the packaging and
remove all packing foil and tape.
Inserting the back-up batteries
The back-up batteries ensure that the time, date and alarm
time setting are not lost in the event of a power cut. For this
you require two 1.5 V batteries of the type AAA/Micro.
They are not supplied.
1. Open the lid of the battery compartment 2) on the under-
side of the kitchen radio.
2. Insert the batteries. Make sure the polarities are correct.
Otherwise, the memory receipt will not function and dam-
age may be caused to the appliance.
3. Close the lid of the battery compartment 2). The lid must
audibly engage.
- Memory buttons M1–M4
- to save and automatically search
for and save radio stations
- automatic recall of saved radio
stations
- controls the timer programming
- controls the alarm function 2
- Volume reduction
- controls the alarm function 1
- Volume increase
- User switching,
Radio waveband switching
- controls the display and
clamp strip illumination
- recalls the settings,
Button lock
- Selection button down
- Selection button up
- Switch the radio on/off
controls the switch off timer
- 60 -