Step 2 Turning On The Power And Logging On To The System; During Connection To The Nsr-1000 Series Or Realshot Manager Advanced - Sony RM-NS1000 Kurzanleitung

Step 2 Turning On the Power and
Logging On to the System
The system controller turns on when the power cord of the AC adapter is plugged into a power
outlet.
Note
In this chapter, mainly the screens of RealShot Manager Advanced are used for the
explanations. These screens are subject to change without notice.
During Connection to the NSR-1000 Series or RealShot
Manager Advanced
Note
A keyboard and mouse are required when logging on to the NSR-1000 series or RealShot
Manager Advanced. If the user name and password consist only of numbers, you can use the
numeric keypad of the system controller to log on.
1
Connect the AC adapter of the system controller to an outlet.
The power of the system controller turns on and the top screen appears.
2
Log on to the system.
Use the keyboard to enter your user name and password, and click [Logon].
14

Step 2 Turning On the Power and Logging On to the System