Attachment Installation - Cascade 6077298-R4 Bedienungsanleitung

I
NSTALLATION

Attachment Installation

IMPORTANT: Integral attachment installation is an OEM
or dealer responsibility. Some of the following steps may
or may not be required, but are shown for reference. Refer
to the appropriate service manual for service and repair
procedures.
WARNING: Check the attachment weight
(located on the nameplate) to make sure the
overhead hoist and chains or straps are at
least the rated capacity of the attachment.
1
Integral Sideshifter carriage should
be installed in mast per OEM
specifications and procedures.
2
Check lower hook clearance
6077298-R4 EN
Front View
Mast
Carriage
FP0866.eps
FP0666.eps
Lower Hook
Tighten capscrews to
120 ft.-lbs. (165 Nm).
Clearance:
1/32 in. (0.8 mm) Min.
1/16 in. (1.6 mm) Max.
Sideshifting
Frame
FRONT
FP0860.eps
FP0860.eps
7