I
NSTALLATION
NOTE: Some configurations of this product are shipped
with the fork positioner unmounted. Follow this step to
install the mounting shims and capscrews.
3
Install Shims and Capscrews
A
Shim as necessary with a maximum of 4
shims per side.
B
Install capscrews and tighten to 50 ft.-lbs.
(65 Nm).
Fork Positioner
Recommended Torque Sequence
A LH side top
B RH side bottom
C RH side top
D LH side bottom
8
Sideshifter
FP1125.eps
RH Side
C
B
FP1416.eps
NOTE: Maximum 4 shims per side. Maximum
difference in number of shims per side is 2.
CAUTION: Total allowable gap before tightening
capscrews is .020 in. (0.5 mm) maximum.
FRONT
LH Side
Confirm fork carriers are
behind face of carriage
FRONT
using a straight edge.
Fork Carriers
B
Capscrews –
Use lockwashers
and tighten to
50 ft.-lbs. (65 Nm).
A
Shims – Maximum 4 per side
to reduce allowable gap to
.020 in. (0.5 mm) maximum.
A
D
6077298-R4 EN