ESAB EPP-200 Bedienungsanleitung Seite 250

SECTION 6
6.3 Front Panel Fault Lights
Fault Indicator Lights
• Coolant Flow – Will show low coolant flow. The
light will briefly show a fault when console is turned on
and then go out.
• Plasma Gas Pressure — fault indicator – low plasma
gas pressure. Torch will not fire when indicated.
• Interlock Fault – Indicates Remote Plumbing box door
is not properly closed.
P/S Temp – fault indicator – over temperature condition
•
in the inverter power source.
• P/S Fault – Not used.
Over/Under Voltage – fault indicator – input voltage is
•
above or below the tolerances of the power source
console. Will stay shut down console until main power
switch is recycled.
250
TROUBLESHOOTING