Trouble Shooting; Service And Maintenance Etc - Nilfisk Action A 100 Bedienungsanleitung

E

Trouble shooting

n
Repair or service of electrical
g
components such as cord or motor,
l
must only be carried out by an
i
authorized service center.
s If the machine
does not start
h
Reduced suc-
tion power
If the machine
stops
12
Check that the plug
is correctly fi tted to
the wall socket.
A fuse in the
building may have
blown and needs
to be changed.
The cord or plug
may be damaged
and must be
repaired by an
authorized service
center.
The dust bag may
be full and needs
to be changed,
see instructions.
The prefi lter,
HEPA fi lter can be
blocked and have
to be changed,
see instructions.
The bent tube,
hose, tube or
nozzle may be
blocked and needs
to be cleaned.
The thermal fuse
may have blown,
see instructions.
Service and maintenance
• Store the machine indoors and in a
dry environment.
• Change the prefi lter with every
fourth dust bag. The dust bag
package includes four dust bags
and one prefi lter.
• Clean the machine surface with
a dry cloth or a damp cloth with a
little cleaning agent.
• Order original accessories from a
local dealer.
• Service – contact your local dealer.
Recycling and scrapping
Recycle the wrapping and scrap the
machine according to recommen-
dations from the local authorities.
Cut the cord as short as possible to
avoid someone getting injured on the
scrapped machine.
Environmental commitment
This machine is designed with the
environment in mind. All plastic parts
due marked for recycling.
Responsibility
Nilfi sk disclaim all responsibility for all
damage caused by incorrect use or
modifi cation of the machine.
Guarantee
The warranty can vary between
different countries. Contact your local
dealer for information.