Operation - Unold 86880 Bedienungsanleitung

OPERATION

1. Ensure that the appliance is
standing on a suitable, level
substrate, and has been set up so
that it is safe and stable.
2. Plug the power cord into an
electrical outlet.
3. Press the „On/Speed" button
(foot button on the base, or via
the remote control unit).
Setting the tilt angle
4. You can tilt the motor housing
horizontally to a certain extent. To
do this, press the motor housing
into the desired tilt angle. To
avoid damage to the appliance,
do not use force.
Setting the speed
5. The symbol
moves clockwise. For the first
three seconds, the appliance is
now running at medium speed,
thereafter it switches automati-
cally to the low speed.
6. Press the „On/Speed" button
repeatedly until the appliance
is working in the desired speed
mode. The current setting appears
in the display.
Low speed:
Symbol
Medium speed:
Symbol
High speed
Symbol
Setting the mode
7. Press the „Mode" button and
select the
mode. You can select Standard
mode, Near Natural mode, and
Sleep mode. Press the „Mode"
button repeatedly until the desi-
red setting appears in the display.
20
lights up and
desired operating
Standard mode
Symbol
Near Natural mode
Symbol
The appliance works with alter-
nating speeds that feel like the
natural movement of air.
Sleep mode
Symbol
The appliance works at a reduced,
changing speed, thus catching
cold due to air draught is preven-
ted.
Swing function/oscillation function
8. Press the „Swing" button repea-
tedly until the appliance is wor-
king with the desire swing func-
tion.
Oscillation switched off:
Symbol
Horizontal oscillation:
Symbol
Vertical oscillation:
Symbol
3D oscillation:
All oscillation symbols are illumi-
nated.
Anion function
The anion function refreshes
the ventilated air. With the
anion function activated, the
symbol is flashing. The anion
function is always deactivated in
the factory. If you want to use the
anion function, you must switch
it on by pressing the „ANION"
button. The negative ions that are