Operation - Unold 86990 Bedienungsanleitung

OPERATION

1. Note: You can also use the fan function without cooling function.
2. Ensure that the appliance is standing on a suitable, level substrate, and has
been set up so that it is safe and stable.
3. Plug the mains plug into an electrical outlet.
4. Press the „ON/OFF" button once. The appliance starts. In the basic setting
the appliance runs at low speed in Normal mode.
Setting the speed
5. Press the „Speed" button repeatedly until the appliance is working at the
desired speed. The appropriate setting is shown by the respective indicator
light:
Low speed:
Medium speed
High speed:
Swing function/oscillation
6. Press the „Oscillation" button to switch on the swing function. Press the
button again to stop the appliance at the current position, the fan however
keeps running.
Timer
7. Via the „Timer" button you can select the desired runtime of the appliance.
This is possible in the range of 1, 2, 4 and 8 hours. Press the „Timer" but-
ton until the desired number of hours appears in the display. After this time
elapses the appliance switches off automatically. If you do not make a time
setting, the appliance will run continuously.
Setting the mode
8. Press the „Mode" button and select the desired operating mode. You can
choose from Standard mode, Near-Natural mode (the appliance works with
alternating speeds, that feels like natural air movement) or Sleep mode (the
appliance likewise works with alternating speeds, from higher to lower).
Press the „Mode" button repeatedly, until the desired setting is shown by
the indicator light.
Stand 18.6.2020
Copyright UNOLD AG | www.unold.de
Low
Med
High
DE
EN
FR
NL
IT
ES
PL
29 von 88