Operation; Cleaning And Care - Unold SILVERLINE 86820 Bedienungsanleitung

OPERATION

1. Ensure that the appliance is stan-
ding on a suitable, level subst-
rate, and has been set up so that
it is safe and stable.
2. Do not use in the bathroom or
damp location
3. Locate the fan on the floor where
is convenient to a supply socket.
4. Plug the power cord into an
electrical outlet (220–240 V~,
50 Hz).
5. If moving the fan to a different
location, switch off and unplug
from the mains.
Tilt angle
6. You can tilt the motor housing
verticaly to a certain extent. To do
this, press the motor housing into
the desired tilt angle. To avoid
damage to the appliance, do not
use force.
Setting the speed
7. Switch on the appliance by selec-
ting one of the three speed levels

CLEANING AND CARE

Switch off the appliance, by
pressing the "0" button, and
unplug it from the electrical
outlet.
Wait until the appliance has come
to a complete standstill.
Never immerse the appliance in
water. The motor or electrical
components of the appliance must
not get wet.
1. Never use any abrasive scouring
agents, steel wool, metal objects,
18
and pressing the appropriate but-
ton:
ƒ Level 1: Light breeze
ƒ Level 2: Moderate breeze
ƒ Level 3: Strong breeze
ƒ The button "0" switches off the
appliance.
8. You can change the speed levels
at any time.
Swing function/oscillation function
9. Press the oscillation button on
the rear of the appliance head
downward. The appliance now
swings autonomously.
10. If you want to switch off the swing
function,
button upward.
Switching off
11. Press the button "0" to switch
the appliance off. When you are
no longer using the appliance,
unplug the plug from the electri-
cal outlet.
hot cleaning agents or disinfec-
tants.
2. Wipe off the stand tube and grille
of the fan with a slightly damp
cloth.
3. Store the fan in a dry, safe place
so that it is protected from dust,
impact, heat and moisture.
pull the oscillation