Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
REMOTE CONTROL/BATTERY REPLACEMENT
1.
Carefully pull the cover of the battery compartment out of the remote control
unit.
2.
Insert the battery into the intended holder.
3.
If you want to insert a different battery, ensure that you use a CR2025 but-
ton cell battery.
4.
Carefully slide the cover back into the remote control unit.
5.
If you adjust the appliance with the remote control unit, ensure that you
always hold it in the direction of the fan while you are making the settings.
6.
The designations on the remote control unit are identical to the designations
of the buttons on the appliance.
7.
To avoid damage, never allow the remote control unit to fall from a signifi-
cant height.
OPERATION
1.
Ensure that the appliance is standing on a suitable, level substrate, and has
been set up so that it is safe and stable.
2.
Plug the appliance into an electrical outlet.
3.
Press once on the display of the appliance or press the ON/OFF button on
the remote control.
4.
The appliance starts. In the basic setting the appliance runs at low speed
in Normal mode.
5.
Now press repeatedly on the display until the desired speed is reached. The
speed is indicated through the appropriate number in the display. The set-
ting can be selected in 9 levels; level 1 offers the lowest speed and level 9
offers the maximum speed. To set the speed via the remote control, on the
remote control press the + and - buttons until the appliance is operating at
the desired speed.
6.
Note: The display will turn off after a while. As soon as you make an entry
again, the display switches on again.
Stand 26.2.2020
Copyright UNOLD AG | www.unold.de
DE
EN
FR
NL
IT
ES
PL
17 von 56
Werbung
Inhaltsverzeichnis
