ausdom M06 Schnellanleitung Seite 4

Wireless Headset English
4) Make sure the distance between the headset and the PC to be
within 1 meter;
5) Press and hold the power button on the headphone until it
powers on but don't let go just yet. Continue holding down on the
power button until you see the LED indicator flashes blue and red
alternately, which means your headphone is in"pairing
mode"waiting to be paired with your device.
6) Wait for the search process to discover the "AUSDOM M06"
device; then select the "AUSDOM M06" device from the search
output list for pairing;
7) If your PC asks for "PIN code", please enter "0000" (4 zeros).
Once the pairing process succeeds, the headset blue LEDs will
be on continuously.
8) If the pairing process fails after 60 seconds, repeat the
aforementioned 1-7 steps.
b. Pairing with the mobile phone
1) Make sure the headset is in OFF mode;
2) Make sure the distance between the headset and the PC to be
within 1 meter;
3) Press and hold the power button on the headphone until it
powers on but don't let go just yet. Continue holding down on the
power button until you see the LED indicator flashes blue and red
alternately, which means your headphone is in"pairing
mode"waiting to be paired with your device.
4) Start the Wireless function of the mobile phone to set device
search;
5) Select the "AUSDOM M06" device from the search output list
for pairing. Once the pairing process succeeds, the headset blue
LEDs will be on continuously.
6) If the pairing process fails after 60 seconds, repeat the
aforementioned 1-5 steps.
7. Connecting to a previously paired devices
M06 can connect to devices that have been paired previously.
Before the M06 headset enters in the pair mode, the M06
headset will automatically connect to the last device that has
been paired and connected with.
- 3-