Mp3 Functions - Silvercrest KH 2309 Bedienungsanleitung

Switching on the repeat function
With the repeat function you can repeat play individual titles or
all the titles of a CD.
> To repeat a single title, during playback press once the but-
ton MODE on the device a or on the remote control 3$.
The display r shows "REP".
> To repeat all the titles of a CD press twice the button
MODE on the device a or on the remote control 3$.
The display r shows "REP ALL".
> To stop repeat playback keep pressing the button MODE
on the device a or on the remote control 3$ until the notice
REP / ALL goes out.
Playing back titles in random order
> Press three times the button MODE on the device
the remote control 3$. The display r shows "RANDOM".
The titles on the CD will be played back from now on in
random order.
> Press the button MODE on the device
control 3$ again to switch the function off once more.
Programme playing order
You can programme an order in which the titles of a CD are to
be played. 21 programme locations are available for this pur-
pose. Programming is only possible when playback is stopped.
> Press the button PROG on the device
control 3@.
In the display r appears the programme position 1 (P 0 1) of
the title which is to be the first title played back with the pro-
gramme playback. The PROGRAMME indicator will blink.
> Select with the SKIP+/— button on the device
the remote control 3!/3% the desired title for the indicated
programme position. In place of the programme position
indicator the display r now shows the respectively selected
CD title.
> To save the selected title press the button PROG on the de-
vice u or on the remote control 3@.
> To programme further titles, repeat the previously described
steps.
Starting the programmed title list.
> Once you have programmed all desired titles you can start
playback by pressing the  PLAY/PAUSE button h
and/or 3^.
> When you press the STOP
end the playback, however the device remains in the pro-
gramme mode.
> When you press the STOP
you delete the programme and the device exits the pro-
gramme mode.
When the device has played back all of the programmed
titles the programme will be deleted. This also happens when
you open the CD tray, switch to another programme source
or switch the Micro system off. Then the PROGRAM indicator
goes out.
a or on
a or on the remote
u or on the remote
t/d or on
 button f and/or 3) you will
 button f and/or 3) twice

MP3 functions

"MP3" denotes a process and/or format developed by the
Fraunhofer Institute for the compression of audio data. In the
MP3 format compressed music pieces are only a fraction of
their original size, which, for example, on CD-Rs/CD-RWs al-
lows for storage of a considerably greater volume of music
than on commercially available audio CDs, on which audio
data is stored in the CDA format. Indeed the audio quality is
scarcely reduced by the process.
Playing MP3 titles
> Place a CD with MP3 files into the CD tray.
> Move the FUNCTION switch
The device reads the disc. The display r then shows, for ap-
prox. 1 second, the number of folders contained on the disc
and subsequently the total number of titles.
> To start playback of the MP3 CD press the button
PLAY/PAUSE h and/or 3^.
In the display r appears the MP3 indicator and the playback
symbol . The display r shows, alternating with the title
number, the number of the folder from which is currently being
played back (i.e. F02 for folder 2 in alphabetical order).
When the MP3 CD contains several folders proceed as follows:
> To select a folder before playback starts press repeatedly
the button FOLDER 6 3& or the button FOLDER 5 2(.
> Press the button  PLAY/PAUSE h and/or 3^ to start
playback with the files from this folder. After the files from
this folder have played back the device switches to the next
alphabetical folder.
> To select another folder
the button FOLDER 6 3& or the button FOLDER 5 2(.
Stopping playback
> Press the button STOP
Next/previous title
> To playback the next MP3 title on the CD press the button
SKIP + t on the device and/or on the remote control 3!.
> To playback the previous MP3 title on the CD press the but-
ton SKIP — d on the device and/or on the remote
control 3%.
Search forward and backward
You can activate a search to look for specific passages within
an MP3 title.
> For this, during playback, hold down the button SKIP +
on the device and/or on the remote control 3! (forwards)
or the button SKIP — d on the device and/or on the remote
control 3% (backwards) until the desired point in the title is
reached.
Programming the MP3 title order
You can programme the order, in which the titles on an MP3
CD are played back. 99 programme locations are available
for this purpose. This is only possible when the play function
has been stopped
- 30 -
o to the CD/MP3 position.
during playback press repeatedly
 f and/or 3).

t