Mp3 Functions - Silvercrest KH 2307 Bedienungsanleitung

You will also clear the programme if you open the CD
compartment t , switch to another programme source or
switch off the micro system. Then the PROG indicator goes out.

MP3 functions

"MP3" denotes a process and/or format developed by the
Fraunhofer Institute for the compression of audio data. In the
MP3 format compressed music pieces are only a fraction of
their original size, which, for example, on CD-Rs/CD-RWs
allows for storage of a considerably greater volume of music
than on commercially available audio CDs, on which audio
data is stored in the CDA format. Indeed the audio quality is
scarcely reduced by the process.
Playing MP3 titles
> Place a CD with MP3 files into the CD compartment
> Move the function switch
The device will now read the MP3-CD. After which playback of
the first title begins. The display j shows you, on the right next
to the time of day, the number of the currently playing title,
the MP3 indicator as well as the playback symbol .
Playback stop/resume
> During playback press the button
and/or the button PLAY/PAUSE 3& on the remote control to
stop playback. When MP3-CD playback is stopped the
playback symbol  blinks in the display j.
> To resume playback press the button
PLAY/PAUSE 3& again.
Starting playback
> When the MP3-CD has been paused or stopped press
the button s on the device and/or the button

PLAY/PAUSE 3& on the remote control.
> When the MP3-CD contains several folders proceed as
follows:
> To select a folder before the start of playback press , if
necessary, several times the button FOLDER UP d on the
device or on the remote control 4).
In the display j is shown the folder number and to the left of
it you will see the "ALB" indicator (= Album). The root directory
will be treated by the device as folder "001".
> Within aprox. 3 seconds press the button
device and/or PLAY/PAUSE 3& on the remote control to
begin playback of the files in this folder. If the time elapses
the display j returns to the indicator for the total title count.
After the files from this folder have played back the device
switches to the next alphabetical folder.
> Press once the button FOLDER UP
the remote control 4) and for approx. 3 seconds the
indicator of the current folder number will blink.
> Press during playback several times the button FOLDER UP d
on the device or on the remote control 4) and playback will
instantly switch to the first title of the selected folder.
Stopping the play function
> Press the button STOP a on the device and/or on the
remote control 4@.
The display j now shows you, on the right next to the time
of day, the total number of titles that are on the MP3-CD.
q to the CD/MP3 position.
s on the device


s and/or
 s on the
d on the device or on
Next/previous title
> To playback the next title from a MP3-CD press the button
F.FWD  o on the device and/or the F.FWD button 3* on
the remote control.
> To start playback once more of a MP3-CD title that has just
played press once the button REW  i on the device
and/or the REW button 4# on the remote control.
> To playback the previous title of a CD briefly press twice
successively the button REW  i on the device and/or
the REW button 4# on the remote control.
Search forward and backward
You can activate a search to find specific passages within an
MP3 title.
> For this, during playback, hold down the button F.FWD
and/or F.FWD 3* (forwards) or the button REW  i
and/or REW 4# (backwards) until the desired location
t.
in the title is reached.
Programming the playing order
You can programme an order in which the titles of a CD are
to be played. 20 program positions are available for this purpose.
Programming is only possible when playback is stopped.
> Press the button PROG
remote control 3(.
In the display j blinks the programme position 1 (P0 1) of the
title, which will be the first title played when programme play-
back begins. The PROG indicator also blinks in the display j.
If you do not make an entry within a minute the device again
exits from the Programme-Mode.
> Select with the REW
device and/or REW/F.FWD 4#/3* on the remote control
the desired title for the indicated programme position. In
place of the programme position indicator the display j
now shows the CD titles available for selection.
> To access a title in another folder on the MP3-CD keep
pressing the FOLDER UP button on the device d and/or
on the remote control 4) until the display j shows the
desired folder number.
> Press the PROG button
selection. Then select the desired title in the folder.
> To save the selected title press the button PROG
> To programme further titles, repeat the previously described
steps.
Starting the programmed title list.
> Once you have programmed all desired titles you can start
playback by pressing the  button s on the
device and/or PLAY/PAUSE 3& on the remote control.
> If you press the STOP button
on the remote control you will stop playback, however
the device remains in the programme mode.
> If you press the STOP button
on the remote control twice you will clear the programme
and the device exits the programme mode.
You will also clear the programme if you open the CD
compartment t, switch to another programme source or
switch off the micro system. Then the PROG indicator goes out.
- 30 -
y on the device and/or on the
/F.FWD  buttons i/o on the
y and/or 3( to confirm the folder
y and/or 3(.
a on the device and/or 4@
a on the device and/or 4@
 o