Before First Use; Automatic Switch-Off; Preparing The Appliance - Silvercrest SWWS 240 A1 Bedienungsanleitung

Before first use
1) Wipe the appliance with a damp cloth both inside and outside
to remove any residual dust left over from transport. Dry it well
so that there is no moisture left in the appliance.
2) Place the appliance on a level and heat-resistant surface. Also
keep in mind that wax splashes may drip onto the surface. The
surface should therefore be easy to clean.
Automatic switch-off
After 60 minutes, the appliance will switch off automatically. After
55 minutes, the control lamp
the appliance is about to switch off automatically.
The automatic switch-off is not intended as a substitute for removing
the plug from the mains power after use! It is merely a safety feature!
Always remove the plug from the mains power socket when the ap-
pliance is not in use!

Preparing the appliance

Once the appliance is set up on a suitable surface:
1) Remove the wax discs
2) Add the required number of wax discs
Use the following standard values as an orientation aid. The values
may vary.
│ GB │ IE
■ 8
will start flashing to notify you that
from its packaging.
to the inner bowl .
SWWS 240 A1