Danger For Children - Silvercrest SKMP 1300 C2 Bedienungsanleitung

The device must be disconnected from the mains if left unattended
and prior to assembly, disassembly or cleaning.
Please remember that the blades of the blender jug are very sharp:
- Never touch the blades with your bare hands, to avoid cuts.
- When washing manually, the water should be sufficiently clear
that you can see the blades easily, so that you do not injure
yourself on them.
- When emptying the blender jug, ensure that you do not touch
the blades.
Prior to replacement of parts or attachments which move when in
operation, the device must be switched off and disconnected from
the mains.
Please take note of the chapter on cleaning (see "Cleaning and ser-
vicing the device" on page 13).

DANGER for children

Children must not play with packing ma-
terial. Do not allow children to play with
plastic bags. There is a risk of suffoca-
tion.
DANGER to and from pets
and livestock
Electrical devices can represent a haz-
ard to pets and livestock. In addition,
animals can also cause damage to the
device. For this reason you should keep
animals away from electrical devices at
all times.
DANGER! Risk of electric
shock due to moisture
The device must never be operated in
the vicinity of a bathtub, a shower, a
filled washbasin or similar.
The base unit, the power cable and the
mains plug must not be immersed in wa-
ter or other liquids.
Protect the base unit against moisture,
water drips and splashes.
Should liquids enter the base unit, pull
out the mains plug immediately. Have
the device checked before reusing.
6
GB
Never touch the device with wet hands.
If the device falls into water, disconnect
the mains plug immediately. Only then
is it safe to retrieve the device.
DANGER! Risk of electric
shock
Only plug the mains plug into the wall
socket after the device has been com-
pletely assembled.
Only connect the mains plug to a prop-
erly installed and easily accessible wall
socket whose voltage corresponds to
the specifications on the rating plate.
The wall socket must continue to be eas-
ily accessible after the device is
plugged in.
Ensure that the power cable cannot be
damaged by sharp edges or hot points.
Do not wrap the power cable around
the device.
Even after it has been switched off, the
device has not been completely discon-
nected from the mains. In order to fully
disconnect it, pull out the mains plug.
Keep the power cable away from hot
surfaces (e.g. hot plate).