Line In Operation; Setting The Alarm Wake Time - Silvercrest KH 2311 Bedienungsanleitung

Winding the cassette forward and backward
Note: Only use the wind function when the tape is
stopped otherwise the tape could be damaged.
Press the cassette key
Press the cassette key
to stop winding.
Press the key
Cassette recording
You have the potential of recording onto a cassette radio pro-
grammes, CDs, MP3/WMA files from USB memory mediums
or the audio signal of a device connected to the
socket.
Tune to the desired station and/or place the desired CD
into the CD tray. Connect an MP3 player, for example, to
the socket or plug in the USB memory medium.
LINE IN
Start playback of the corresponding audio source.
When you want to start the recording press the cassette
key . The key locks at the same time.
When you want to stop recording press the cassette key
.
Observe copyright laws!
When recording cassettes from CDs, USB memory mediums
or copying radio transmissions be aware of the copyright
regulations of the country, in which the device is to be used.

Line In operation

You can playback audio signals from other devices, for exam-
ple an MP3 player, via the Micro system.
Connect the audio output of, for example, the MP3 player
via a 3.5 mm jackplug lead (not supplied) to the
socket on the Micro system.
Switch the Micro system on with the
on the device or with the
remote control.
Press repeatedly the button
and/or on the remote control until the notice LINE appears
in the display.
Begin playback of the connected device.
to wind the tape forwards.
to wind the tape backwards.
LINE IN
LINE IN
STANDBY button
STANDBY/ON button on the
on the device
FUNCTION

Setting the alarm wake time

With the Micro system you can be awakened by a radio
programme, from the sound of a CD, a USB memory medium
or with a signal tone. For this you can programme two wake
times.
Note: If you want to be woken by a CD or a USB mem-
ory medium insert/plug in beforehand the corresponding me-
dium. If no medium is inserted/ plugged in the Micro system
automatically wakes with a signal tone. You can only set the
wake time in standby mode.
Press and hold the button
remote control until the notice
the display and the hour indicator blinks.
Press the button
on the device and/or on the remote control to set the hour.
Press the button
AL. SET/OFF
Press the button
on the device and/or on the remote control to set the min-
utes.
Press the button
AL. SET/OFF
The operation mode
Press the button
on the device and/or on the remote control to set the de-
sired mode of operation (RADIO, CD, USB or BUZZER).
Press the button
AL. SET/OFF
The alarm volume blinks in the display.
Press the button
on the device and/or on the remote control to set the de-
sired alarm volume.
Press the button
AL. SET/OFF
The time of day is shown again in the display. The notice
is an indication that the wake function is
and/or
activated.
If you want to deactivate the wake function press, briefly,
the button
AL. SET/OFF
goes out.
If you want to activate the wake function again with the
previously set parameters press, briefly, the button
or . The notice
OFF
the display.
- 45 -
or
AL. SET/OFF
appears in
and/or
or
SKIP/SEARCH SKIP/SEARCH
or to save the setting.
or
SKIP/SEARCH SKIP/SEARCH
or to save the setting.
blinks in the display.
or
SKIP/SEARCH SKIP/SEARCH
or to save the setting.
or
SKIP/SEARCH SKIP/SEARCH
or to save the setting.
or . The notice
and/or appears again in
on the
and/or
AL. SET/