Herunterladen Inhalt Inhalt Diese Seite drucken

Usb Operation; Charging Other Devices Via Usb Port; Troubleshooting - Silvercrest SBS 60 B2 Bedienungs- Und Sicherheitshinweise

Tv-stereo-soundbase
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Note: Usually, audio devices remember the
identification of the device . In this case, it may not
be necessary to establish the connection manually
again if the Bluetooth
®
˜ USB operation
Plug the USB device into the USB socket
Press the
button
repeatedly or press the USB button on the
remote control to select USB mode . The
light
is flashing in orange .
10
This USB port can read MP3 file .
During playback:
- To pause or resume play, press the
PAIR button on the remote control .
- To skip to the previous / next file, press the
,
buttons on the remote control .
- Press and hold the
remote control to perform fast forward /
reverse playback . Release the button to
resume normal playback .
˜ Charging other devices via
USB port
This USB port charge other devices, if those
devices have charging function .
function is activated .
15
on the product
2
,
buttons on the
˜ Troubleshooting
To keep the warranty valid, never try to repair the
system yourself . If you encounter problems when
using this product, check the following points
before requesting service .
= Fault
= Action
No function / no display
Ensure the mains cable is connected securely .
Make sure that the product is switched on .
The remote control does not function
Use the remote control near the product .
Point the remote control at the remote control
sensor
on the product .
5
Replace the battery in the remote control with
.
a new one .
Remove any obstacles between the remote
control and the product .
Loud hum or noise is heard
Check if audio in plugs are well connected
The product does not respond when
/
pressing any buttons
An electrostatic discharge has occurred,
which blocks the soundbase . Switch off the
soundbase on the main switch
5 seconds and then switch it on again . You
can use the soundbase as usual now .
No sound output
Make sure that the product is not
muted . Press the MUTE button
VOL +/– button
listening .
Ensure the audio setting of the input source
(e . g . TV, game console, DVD player, etc .) is
set to PCM mode .
for approx .
11
or the
21
/
to resume normal
4
20
GB
17

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis